Blog and Knowledge
Technical articles and cutting tool guides to help you choose the right products for your operation.
How Thai CNC Factories Use Renishaw: Probing, Tool Setting, CMM, and Process Control
A practical selection guide for Renishaw product groups in Thailand, from CNC probing and tool setting to CMM, Equator, fixtures, styli, and calibration.
Tool Wear Troubleshooting: Flank Wear, Crater Wear, Chipping, and Built-Up Edge
Read cutting edge wear patterns to identify root causes before changing grade, speed, or feed.
How to Choose Insert Nose Radius for Finish, Strength, and Cutting Force
Compare 0.2, 0.4, 0.8, and 1.2 mm nose radii for roughing, finishing, and stable turning.
Milling Chatter Troubleshooting: Holder, Overhang, Speed, and Toolpath
A practical sequence for reducing chatter marks, noise, and short tool life in milling.
Stainless Steel Machining Guide: Reduce Work Hardening and Control Chips
Choose edges, coatings, coolant, and parameters for stainless jobs that heat up and work-harden easily.
Aluminum Machining Tool Selection: Geometry, Flutes, and Built-Up Edge
Select polished geometry, flute count, coatings, and coolant for cleaner aluminum milling.
Tap vs Thread Mill: Which Threading Method Should You Choose?
Compare speed, risk, flexibility, and thread quality between taps and thread mills.
Reamer Hole Finish Guide: Size Control, Allowance, and Runout
Prepare holes correctly and control runout for accurate reamed bores and consistent finish.
CNC Tool Runout Guide: Why Small Errors Shorten Tool Life
Understand how runout changes chip load, surface finish, and tool life, plus practical inspection steps.
Parting and Grooving Insert Guide: Stability, Chip Control, and Blade Life
Set up parting blades correctly and choose groove width, insert geometry, and coolant strategy.